About Polymist® XPP 552V is a white PTFE micronized powder composed of discrete particles. Designed for use in critical engineering and high end performance Coatings and Inks, Polymist® XPP 552V will improve non-stick properties, mar and abrasion resistance as well…
About Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables. Applications: bearing gasket valvedisk V-ring O-ring plug…
About 3M™ Dyneon™ PTFE Compound TF R4303 is a free-flowing suspension PTFE compound containing 15% graphite for ram extrusion. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good chemical stability High…
About Daikin- Polyflon™ M-112 is a modified polytetrafluoroethylene virgin granular fine cut resin. This next generation molding powder has been specifically designed for use in small to large billet compression molding. It is particularly well suited for flex applications, such…
About 3M™ Dyneon™ PTFE Compound TF 3235 is a non-free-flowing suspension PTFE compound containing 31% carbon graphite for compression moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction and wear Low moulding pressure…
About 3M™ Dyneon™ PTFE Compound TF 4212 is a free-flowing suspension PTFE compound containing 10% electro-graphitized carbon for compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good…
About Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: large billet(300-1,500mm height) sheet moulding. feed stock. Characteristics: fine particle powders. high tensile…
About Algoflon® G10 is a polytetrafluoroethylene (PTFE) virgin resin. This product has been developed as a PTFE resin for use in ASTM D4894-15, Type 1 applications. Algoflon® G10 is recommended for use in pyrotechnic applications.&& Product Description Supplier Solvay Generic…
About Dyneon™ TF 2072 Z PTFE is an ideal grade for thin-wall, small diameter tubing and wire and cable insulations, processed by paste extrusion method at reduction ratio up to 3000:1. This product offers more economic processing because of larger…
About Avalon 16 is a Polytetrafluoroethylene (PTFE) product filled with glass fiber. It is available in North America. Primary characteristic: lubricated.&& Product Description Generic PTFE Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method…
About 3M™ Dyneon™ PTFE Compound TF 3215S is a non-free-flowing suspension PTFE compound containing 25% electro-graphitized carbon for compression moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Low moulding pressure…
About The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing…
About Teflon ® PTFE 807N X is a free flowing PTFE granular resin designed for compression or automatic molding and ram extrusion (low back pressure). It offers an excellent combination of properties that are characteristic of Teflon ® fluoropolymer resins:…
About Tarflen® SM-S15G2 is a Polytetrafluoroethylene (PTFE) material filled with 15% glass fiber and 2.0% graphite fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Important attributes of Tarflen® SM-S15G2 are: Chemical…
About Fluoroplex F 15 AZ 02 – GMP is a Polytetrafluoroethylene (PTFE) product filled with 15% glass fiber. It can be processed by injection molding or sintering and is available in Latin America or North America.&& Product Description Generic PTFE…
About 100% repro PTFE&& Product Description Generic PTFE Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 2.14 g/cm³ ASTM D4894 Apparent density 0.93 g/cm³ ASTM D4894…
About Sanitary gasket made from Fluoraz® 784 work well in SIP and CIP applications where a low durometer elastomer compound is needed. While EPDMs and FKMs can provide a seal for extended periods, change in physical properties can have adverse…
About Algoflon® DF 130 F is a white fine coagulated powder and is produced without any intentional use or addition of PFOA. It is designed for paste extrusion and is particularly recommended for manufacture of porous items and fibers. It…
About 10% carbon fiber + 90% virgin PTFE&& Product Description Generic PTFE Material Status Commercial: Active Features High liquidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 2.08 g/cm³ ASTM…
About POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused…