About Reinforced with a proprietary synthetic mica, Semitron ESd 500HR offers an excellent combination of low frictional properties, good dimensional stability and electrostatic dissipation. Whenever virgin PTFE causes electrical discharge problems, Semitron ESd 500HR will provide a controlled bleed-off of…
About Arlon’s AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier…
About 20% polyimide + 80% virgin PTFE&& Product Description Generic PTFE Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.90 g/cm³ ASTM D4894 Apparent density 0.70…
About Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables. Applications: piston ring bearing ball valve sheet…
About Material Glass Formulated PTFE Features/Benefits Excellent heat, wear, and chemical resistance. Good cryogenic properties. Caution: can be abrasive running against soft metals at high surface speed. Excellent material for back-up rings. Working Temperature Range -450° to +600°F [-268° to…
About Algoflon® D 2510 F is a PFOA-free white aqueous PTFE dispersion. It is designed for impregnation processes and is particularly recommended for production of fabrics and laminates. Algoflon® D 2510 F exhibits excellent wetting properties and high shear stability.…
About Algoflon® DF 681 F is a white fine coagulated powder and is produced without any intentional use or addition of PFOA. It is designed for paste extrusion and is particularly recommended for manufacture of both medium to high reduction…
About Daikin PTFE D-610C is a homopolymer polytetrafluoroethylene aqueous dispersion manufactured without the use of PFOA. D-610C has been designed for cast film and glass fabric coating applications where increased build is desired. D-610C contains a more environmentally friendly surfactant…
About Algoflon® L203 a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles. Algoflon® L203 can be de-agglomerated to sub-micron particle size by the application of shear providing a better dispersion and distribution…
About DAIKIN-POLYFLON PTFE LDW-40 is an aqueous dispersion of low molecular weight PTFE. LDW-40 doesn’t fibrillate by compressive shear force since the molecular weight is low. LDW-40 is recommended for use as an additive in aqueous paints to increase water…
About The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing…
About Dyneon™ TF 2029 Z PTFE is an ideal grade for tapes with high mechanical strength, such as electrical tape for wrapped insulations or flat cables. Also ideal for yarn applications, including sewing and weaving yarn for filter and sealing…
About Features and Benefits Meets ASTM D4894 Type IV, Grade 2 resin Semi-free-flowing compression molding powder High bulk density Good for large billets and thin walled isostatic moldings Very dense polymer structure, similar to non-free-flowing grades Excellent flex life Good…
About 3M™ Dyneon™ PTFE Compound TF 4303 is a free-flowing suspension PTFE compound containing 15% graphite for compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good chemical…
About 3M™ Dyneon™ PTFE Compound 1174 N is a non-free-flowing suspension PTFE compound containing 15% glass fibre and 5% molybdenum disulfide for compression moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction and…
About 100% virgin PTFE and inorganic pigment&& Product Description Generic PTFE Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 2.18 g/cm³ ASTM D4894 Apparent density 0.41…
About 3M™ Dyneon™ PTFE Compound TF 3236 is a non-free-flowing suspension PTFE compound containing 33% carbon graphite for compression moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Low moulding pressure…
About Quadrant EPP Fluorosint® 500 is a Polytetrafluoroethylene (PTFE) product filled with mica. It can be processed by compression molding and is available in Latin America or North America. Primary characteristic: flame rated.&& Product Description Supplier Quadrant Generic PTFE Material…
About 3M™ Dyneon™ PTFE Compound TF 6221 is a free-flowing suspension PTFE compound containing an FDA*-approved conductive pigment for compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear…
About Algoflon® DF 230 F is a white fine coagulated powder and is produced without any intentional use or addition of PFOA. It is designed for paste extrusion in low reduction ratio (RR) range and recommended for manufacture of porous…