About Product Description Generic PVC, not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About COMTREX FLEXIBLE PVC 63XCF is a Cadmium Free compound typically used in interior applications such as molding decorative covers for arm rest assemblies that require wear resistance. This compound is available in custom matched black and integral colors. Gloss…
About PVC COMPOUND IN MICROPELLET FORM WITH ABOUT 1MM OF DIAMETER RECOMMENDED FOR TEXTILE APPLICATIONS.&& Product Description Generic PVC, not specified Material Status Commercial: Negative Availabilitys Latin America Technical Data PHYSICAL Nominal value Unit Test method Density 1.21 to 1.27…
About Sylvin 4200-88UV Yellow 4192 Is A Vinyl Compound Formulated With A Non Ortho Phthalate Plasticizer For Molding Or Extrusion Applications That Require An Ultra Violet Stabilizer.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Features…
About CGPC PVC H-80 is a Polyvinyl Chloride material. It is available in Asia Pacific or North America. Primary attribute of CGPC PVC H-80: Impact Resistant. Typical applications include: Consumer Goods Film Furniture Sheet Wire & Cable&& Product Description Supplier…
About Product Description Generic PVC, not specified Material Status Commercial: Active Features Flame Characteristics,Weather resistance is good Availabilitys Europe,Latin America,Asia Pacific,Africa & Middle East ,North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.33 g/cm³ ASTM D792 Aging…
About GFA 61E is a high transparency, normal impact resistance compound designed for use in extrusion blow molding of small capacity bottles up to nearly 0,25 l, according to their characteristics&& Product Description Generic PVC, not specified Material Status Commercial:…
About PVC COMPOUND RECOMMENDED FOR EXTRUSION PROFILE FOR GENERAL USE.&& Product Description Generic PVC, not specified Material Status Commercial: Negative Availabilitys Latin America Process Methods Profile extrusion Technical Data PHYSICAL Nominal value Unit Test method Density 1.34 to 1.40 g/cm³…
About 105°C, Non-Lead Stabilized, Insulation UL Recognized Component Under QMTT2, File # E73402, PVC Insulation Intended for Use in 90°C Wet Locations&& Product Description Supplier Teknor Apex Generic PVC, not specified Material Status Commercial: Active Features Flame Characteristics,Grease resistance Availabilitys…
About APEX® 3202-60NT is a Flexible Polyvinyl Chloride material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of APEX® 3202-60NT are: Plasticized Sterilizable Typical applications include: Caps/Lids/Closures…
About Sylvin 8600-55 Yellow 4166 Is A Vinyl Compound Formulated For Profile Extrusion Applications.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Availabilitys North America Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method…
About A satin finish extrusion compound best suited for extruded T-moldings, tubings and other shapes where uniform flow through the die is required. The compound exhibits excellent abrasion resistance.&& Product Description Supplier Axiall Corporation Generic PVC, not specified Material Status…
About A LEAD FREE, 60°C TO 80°C TEMPERATURE RATED, FLAME RETARDED CABLE JACKETING COMPOUND.&& Product Description Generic PVC, not specified Material Status Commercial: Active Features Flame Characteristics,Lead content is low to none Availabilitys North America,Europe Process Methods Extrusion Technical Data…
About Geon™ Vinyl Flexible C70A0 is a Flexible Polyvinyl Chloride product. It can be processed by coextrusion, extrusion, or injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™…
About APEX® 97-G0029C-82 is a Flexible Polyvinyl Chloride material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of APEX® 97-G0029C-82 are: RoHS Compliant Flame Retardant Typical application of…
About Sylvin 4260-65 Natural Is A Vinyl Compound Formulated With A Non Ortho Phthalate Plasticizer For Extrusion Or Injection Molding Applications.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Features No DEHP plasticizer Availabilitys North America…
About Sylvin 9993-70 Grey 9609 Is A Vinyl Compound Formulated For Injection Molding Applications.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Feature: Fast melting and excellent work safety. Good for general soft material and hard material products Use: Film sheet, leather, pipe, plate, sash not toxic sheet and corrugated plate&& Product Description Supplier HANWHA Generic PVC, not specified Material Status…
About Sylvin 8394-90C Natural Is A Vinyl Compound Formulated For Semi Rigid Extruded Edge Band Applications That Need Lower Volatility And Better Chemical Resistance Than Our General Purpose Type.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial:…
About Geon™ Vinyl Flexible F80E is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Purging Compound. Characteristics include: Low…