About TAFMER™ H-5030S, ethylene based polymer, is a specialty olefinic resin designed to improve impact resistance, flexibility and softness of Polyethylene (PE) and Polypropylene (PP).&& Product Description Supplier Mitsui Generic Polyolefin Elastomer Material Status Commercial: Negative Features Good flexibility,High impact…

About Hostacom TRC 364NA NATRL high melt flow, high modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin. It is typically used for interior trim applications and displays exceptional scratch and mar resistance, low stress whitening, and low emissions.&& Product Description Supplier…

About Miraprene® QS1621 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in Asia Pacific for injection molding.&& Product Description Supplier Mitsubishi Generic Polyolefin Elastomer Material Status Commercial: Active Availabilitys Asia Pacific Process Methods Injection Molding Technical Data…

About MIL- C24640 & MIL-C24643R approved&& Product Description Generic Polyolefin Elastomer Material Status Commercial: Active Features Halogen free,Flame Characteristics Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.43 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test…

About Sinpolene GPP5620/8 is a Compounded Polypropylene material filled with 20% glass fiber. It is available in Asia Pacific for injection molding. Important attributes of Sinpolene GPP5620/8 are: RoHS Compliant Good Dimensional Stability Heat Resistant Impact Resistant Rigid Typical application…

About Softell CA 7413 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’ s proprietary Catalloy process technology. It is suitable for the extrusion, calendering and extrusion blow moulding of very soft film and sheet as well as…

About Vistamaxx 6000 performance polymer is a metallocene catalyzed copolymer.&& Product Description Supplier ExxonMobil Generic Polyolefin Elastomer Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.889…

About Product Information: TPO’s are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment. Features: Tear Resistance, High UV Resistance, Good Density, Low Wide service range from -20 degrees C to 120 degrees…

About INSPIRE™ TF1305 ESU 是滑石粉填充，具有高抗冲性能的PP改性树脂。这一规格适用于有较高外观要求，耐刮擦，抗紫外的汽车零部件。由于其极高的抗冲击性，也特别适合要求高延展性的汽车内饰应用。 应用: 仪表板骨架 仪表板饰件 中控台 门板 门板文件袋 内饰件 卡车饰件&& Product Description Supplier Trinseo Generic Polyolefin Elastomer Material Status Commercial: Active Features Good surface appearance,High impact resistance,Ductility,low-temperature impact resistance,High scratch resistance Availabilitys Latin America,Asia Pacific,Europe Process Methods…

About A speciality thermoplastic polyolefin resin characterized by a good stiffness/toughness balance for automotive exterior applications such as bumper fascia.&& Product Description Supplier ExxonMobil Generic Polyolefin Elastomer Material Status Commercial: Active Features High impact resistance,Ductility,Sprayable,low-temperature impact resistance,Rigid-tough balance Availabilitys Europe…

About GTPO™ 8290 FC是一种聚烯烃热塑性弹性体(TPO (POE))产品,。 它,在北美洲有供货。 典型应用领域为:电线电缆。 主要特性为:flame retardant。&& Product Description Generic Polyolefin Elastomer Material Status Commercial: Active Features Flame Characteristics Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.950 g/cm³ ASTM D792 MECHANICAL Nominal value…

About Exact 3128 is an ethylene-based butene plastomer produced using ExxonMobil Chemical’s EXXPOL® Catalyst Technology. It is designed for both monolayer and multilayer coextruded blown film applications requiring excellent toughness and good heat sealing performance.&& Product Description Supplier ExxonMobil Generic…

About Ming Dih EPS LS3是一种发泡聚苯乙烯产品,。 它,在亚太地区有供货。 Ming Dih EPS LS3的应用领域包括安全设备 和 包装。&& Product Description Supplier ExxonMobil Generic Polyolefin Elastomer Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.900 g/cm³ ISO 1183 Melt…

About Hifax TYC735X high melt flow, 1,150 MPa flexural modulus, paintable, mineral-filled thermoplastic elastomeric olefin (TEO) has an excellent combination of properties and processability. It was designed for use in multiple automotive exterior applications. A UV-stabilized, paintable version, TYC735P, is…

About High elasticity with good elastic recovery High melt strength Good impact strength Good flow characteristics ENGAGE™ HM 7280 Polyolefin Elastomer Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity.…

About “Hifax” RTA3263EUV fractional melt flow, 1,500 MPa flexural modulus, UV-stabilized, mineral-filled, extrusion grade thermoplastic elastomeric olefin (TEO) resin has an excellent combination of rigidity, impact resistance, melt strength, processability and weatherability. It was designed specifically for thermoformed applications.&& Product…

About Exact 3131 is an ethylene-based hexene plastomer produced using ExxonMobil Chemical’s EXXPOL® Catalyst Technology. Exact 3131 is designed for both monolayer and multilayer coextruded cast film applications requiring excellent toughness and heat sealing performance.&& Product Description Supplier ExxonMobil Generic…

About Salflex 255 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) product. It can be processed by blow molding or extrusion and is available in North America. Applications of Salflex 255 include automotive and industrial applications. Primary characteristic: impact resistant.&& Product…

About AS172L-01US is a compounded rubber modified polypropylene with good impact and excellent material flow properties. This product is available in Generic Black for full paint applications and in Natural or Pre-Colored for mold-incolo and/or partial paint applications. Key Applications:…

About Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications.…