About ESPOLEX 3675 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of ESPOLEX 3675 include automotive…
About This TPO compound has been tailored specifically to meet the requirements of each of the major automobile producers. Features include good scuff, nick and wear resistance and also very good ductility and practical toughness. This compound also features medium…
About FLEXIBLE CORD JACKET COMPOUNDS Applications JACKETING/INSULATION&& Product Description Generic Polyolefin Elastomer Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ Supplementary information Nominal value Unit Test method Limited Oxygen Index…
About PRE-ELEC® PP 1384 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity. PRE-ELEC® PP 1384 has excellent mechanical properties and is easy to extrude.…
About Sofprene P® 55D 11I RBT 330 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Sofprene P® 55D 11I RBT 330: REACH Compliant. Typical…
About GTPO™ 8102 EH-2是一种聚烯烃热塑性弹性体(TPO (POE))产品,。 它,在北美洲有供货。 典型应用领域为:电线电缆。 主要特性为:flame retardant。&& Product Description Generic Polyolefin Elastomer Material Status Commercial: Active Features Flame Characteristics Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM D792 MECHANICAL Nominal value…
About PRE-ELEC® PP 1351 is a dissipative thermoplastic compound based on polypropylene. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resistance between 10e5-10e8 ohms. PRE-ELEC® PP 1351 has an excellent balance of…
About Hostacom ETA5081 low melt flow, 490 MPa flexural modulus, blow molding grade thermoplastic elastomeric olefin (TEO) resin combines good processability with balanced strength, toughness and flexibility. It was designed for various under-the-hood applications.&& Product Description Supplier LyondellBasell Generic Polyolefin…
About AS172LW-01US is a compounded thermoplastic polyolefin (TPO) designed for exterior automotive applications requiring cold temperature impact, processability and paintability. This product is available in natural, generic black or pre-colored for padial paint applications. Kev Applications Exterior Parts Bumper Fascia…
About Description Non-flammable PP FB11T1 and FB11ST1 are Widely used for extrusion Molding parts of pipe, sheet, etc., as it allows excellent extrusion moldability,high non-flammability, and fabulous exterior. Characteristics FB11T1: Being Widely used for non-flammable Corrugate tube, non-flammable pipe, etc.…
About ENGAGE™ 8400 Polyolefin Elastomer is an ethylene-octene copolymer that offers excellent performance in durable injection molded industrial and consumer goods and compression molded gaskets. ENGAGE 8400 provides high clarity in products requiring visual inspection and allows the use of…
About Fibremod GB366WG is a 30% chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. The product is available in natural but other colours can be provided on request. This material shows excellent mechanical properties also at elevated…
About Hostacom TRC 1193N is high melt flow, 1,800 MPa flexural modulus, low density thermoplastic polyolefin (TPO) resin. It has an excellent balance of processability, rigidity, impact, scratch and mar resistance. It was designed primarily for injection molding for Instrumental…
About Hifax ETA4161UV fractional melt flow, 1,200 MPa flexural modulus, UV-stabilized, extrusion grade thermoplastic elastomeric olefin (TEO) resin has an excellent combination of stiffness, impact resistance, melt strength, weatherability and processability. It was designed to accommodate specific thermoformed applications.&& Product…
About A speciality thermoplastic polyolefin resin characterized by a good stiffness/toughness balance, designed for automotive exterior applications, with outstanding flowability and good paintability.&& Product Description Supplier ExxonMobil Generic Polyolefin Elastomer Material Status Commercial: Active Features Good Rigidity,High impact resistance,High liquidity…
About STERLENE™ CMW402 is a compounded mineral filled polypropylene (TPO) for injection molding, characterised by good dimensional stability and good heat resistance, suitable for automotive underhood application.&& Product Description Generic Polyolefin Elastomer Material Status Commercial: Active Features Good Dimensional Stability,High…
About Daplen EE103AEB is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding. Applications Daplen EE103AEB has been developed especially for the car industry to be used in automotive exterior parts. Bumpers Exterior trims Special features Suitable…
About ENGAGE™ XLT 8677 Polyolefin Elastomer is an ethylene octene copolymer developed for use as a high efficiency impact modifier for thermoplastic polyolefin (TPO) applications. This product is delivered with a nominal talc partitioning agent to assist in material handling.…
About ENGAGE™ 7270 Polyolefin Elastomer is a general-purpose copolymer designed to provide good cost/performance balance in polymer modification applications. Main Characteristics: Pellet form Applications: Polymer modification&& Product Description Supplier DOW Generic Polyolefin Elastomer Material Status Commercial: Active Availabilitys North America,Latin…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic Polyolefin Elastomer Material Status…