About Material Type: Red color fluoroelastomer compound, hardness Shore A 70-80. Based on bisphenol curable terpolymer which is higher fluorine content than copolymer. Features: Excellent mold flow, hot tear resistance, bonding adhesion, good resistance to the fuel containing alcohols. Process…

About 3M™ Dyneon™ Fluoroplastic THV 500GX4Z is a fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. Because of its well-balanced profile of low temperature processing, low flammability, thermal stability and melt processability, this product should preferably be used for extruded film,…

About BDF601P is a medium to high viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good mechanical properties and excellent compression set resistance are required. BDF601P can be compounded to meet the major fluoroelastomer specifications.…

About VTR-9217 is a developmental precompound based on a recently developed 69% fluorine ‘B’ type fluoroelastomer. This precompound incorporates a bishpenol cure system that can be optionally compounded with peroxide and coagent for ‘dual curing.’ Superior thin extrusions for fuel…

About Fluorous rubber (FKM-DS2600), commonly called 2# rubber, is white elastomer and copolymer of VDF and hexafluoropropylene, with fluorine content of over 66%. The product processed and vulcanized by raw fluorous rubber (DS2600), featured by good mechanical property and excellent…

About 66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Copolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method…

About Material Type: black perfluoroelastomer compound, hardness Shore A75-82. Features: It has excellent chemical resistance, good mechanical properties an outstanding thermal stability, FF4675 parts provide reliable, long-term service with wide range of aggressive industrial and electronic grade chemicals. FF4675 expands…

About 3M™ Dyneon™ Fluoroelastomer FC 2176Z is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FC 2176Z has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Medium viscosity Proprietary incorporated cure technology Ability for…

About DAI-EL LT-271 is a terpolymer suitable for various peroxide cure systems. LT-271 can be formulated to eliminate the post cure process. LT-271 is designed for transfer and compression molding applications that require a balance between good low temperature flexibility…

About Dyneon FPO 3741 is a high fluorine content peroxide curable extrusion grade, which has been developed for hose applications. The grade provides excellent physical properties and is resistant against fuels and different biodiesel grades (RME or SME). Special Features…

About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Process targets: compression molding Proprietary incorporated cure technology Higher viscosity version of FC 2120&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Copolymer Availabilitys North America,Europe Technical Data…

About ETP polymer. This peroxide cured compound is based on a tetrapolymer of Ethylene, Tetrafluoroethylene (TFE) and Perfluoromethylvinylether (PMVE), and a cure site monomer – 70-80 °IRHD. This compound offers a higher level of fluid resistance than that of fluoroelastomers.…

About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Ultra low viscosity gumstock without incorporated curatives Process targets: injection and transfer molding, extrusion, calendering and coatings Viscosity modifier Greater flow and filler loadings compared to conventional high viscosity…

About Recognising the demanding challenges in the oil and gas exploration and extraction industry, PPE has developed the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions. The EnDura®…

About DAI-EL®   G-621 DAI-EL® G-621 is a bisphenol cure incorporated terpolymer designed for transfer and compression molding applications. DAI-EL® G-621 provides excellent chemical and solvent resistance with very low permeation rates.&&DAI-EL®   G-621 DAI-EL G-621 is a fluoroelastomer comprising…

About DAI-EL®   G-801 DAI-EL® G-801 is a peroxide curable copolymer with medium Mooney viscosity suitable for transfer and compression molding. DAI-EL® G-801can be formulated with various peroxide cure systems to eliminate the need for post cure. DAI-EL® G-801 provides…

About DAI-EL®   T-530 DAI-EL® T-530 is a thermoplastic elastomer that has rubber-like elasticity yet processes like a thermoplastic. DAI-EL® T-530 is transparent and low in extractibles. It is USP Class VI certified. DAI-EL® T-530 exhibits excellent physical properties and…

About Material Type: Black color base (alkali) resistance grade fluoroelastomer compound, hardness Shore A 75~85. Based on peroxide curable fluoroelastomer with high fluorine content. Features: Short post cure time. Excellent mold flow and mold release, resulting in less flash Extraordinary…

About Fluoroelastomer (F246) (FKM) Quality Standard: Q/321200GDH010-2010&& Product Description Supplier Meilan Generic 氟橡胶 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.82 to 1.88 g/cm³ Mooney viscosity ML 1+10，121℃ 31 to 50…

About Material Type: Black color fluoroelastomer compound, hardness Shore A 60-70. Based on bisphenol curable copolymers. Features: Excellent mold flow,improved tear resistance and bonding adhesion. Process Methods: Suitable for compression, transfer, injection and extrusion molding processes. Applications: Hoses and rubber…