About 68% Fluorine terpolymers formulated for improved chemical resistance. IF compounds are good choices for fuel applications.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Solvent resistance,Terpolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density…
About BDT40EP is a medium viscosity curative incorporated fluoroelastomer terpolymer. This grade is well suited for application where good flowability, mold release and superior fluid resistance than copolymers are required. BDT40EP can be compounded to meet the major fluoroelastomer specifications.…
About Viton® A-361C is an incorporated cure A-family dipolymer designed for the injection and transfer molding of parts requiring better metal adhesion along with the fluid and heat resistance characteristics typical of fluoroelastomers. The moderate viscosity level of Viton® A-361C…
About 66% Fluorine copolymers formulated for low cost. LC compounds are used in lathe cut and custom molded goods, including value stem seals.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Copolymer Availabilitys North America Technical Data PHYSICAL Nominal…
About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Process targets: injection and transfer molding Improved scorch resistance when compared to other Dyneon FC grade products Proprietary incorporated cure technology Better mold release Better cure response to higher…
About Material Type: Black color low viscosity fluoroelastomer compound, hardness Shore A 65~75. Based on peroxide curable fluoroelastomer with very high fluorine content which brings outstanding chemicals resistance properties. Features: Short post cure time Excellent mold flow and mold release,…
About 3M™ Dyneon™ Fluoroelastomer FC 2181Z is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FC 2181Z has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Process targets: compression and transfer moulding and calendering…
About Material Type: Black color low-temp grade fluoroelastomer compound, hardness Shore A 65~75.Based on peroxide curable fluoroelastomer with high fluorine content. Features: Short post cure time Excellent mold flow and mold release, resulting in less flash Low temperature grade, tr10…
About Commercial polymers are classified into two types; one is the TFE-P dipolymer type (AFLAS® 100/150 Series), and the other is the TFE-P-VdF terpolymer type (AFLAS® 200Series). AFLAS® 200 Series is characterized by the improved low temperature properties, demoldability and…
About DAI-EL® G-558 DAI-EL® G-558 is a bisphenol cure incorporated terpolymer designed for extrusion applications requiring moderate fuel resistance.&&DAI-EL® G-558 DAI-EL G-558 is a fluoroelastomer comprising terpolymer of vinylidenefluoride/tetrafluoroethylene/hexafluoropropylene, contains a curing agent (bisphenol AF) and cure accelerator.…
About 68% Fluorine terpolymers formulated for improved chemical resistance. IF compounds are good choices for fuel applications.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Solvent resistance,Terpolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density…
About DAI-EL™ G-751 DAI-EL G-751 is a cure incorporated copolymer designed for transfer and compression molding applications. G-751 demonstrates good adhesion and excellent processability both in mill and calendaring operations.&&DAI-EL™ G-751 DAI-EL G-751 is a fluoroelastomer comprising copolymer…
About BDF25CP is a low viscosity curative incorporated fluoroelastomer copolymer. BDF25CP is a general purpose grade, well suited for application where good flowability and processing property are required. It can be compounded to meet the major fluoroelastomer specifications. BDF25CP can…
About Dyneon Fluoroelastomer FPO 3631 is a medium fluorine content, peroxide curable grade, which has been designed and tested for 2 component injection moulding and standard injection overmoulding processes with DSM Stanyl® Polyamide 46. The product provides excellent physical properties…
About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Medium viscosity Process targets: injection and transfer molding and calendering Improved chemical resistance compared to lower percent fluorine fluoropolymers Excellent compression set resistance compared to lower percent fluorine fluoropolymers…
About Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010&& Product Description Supplier Meilan Generic 氟橡胶 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.80 to 1.84 g/cm³ Mooney viscosity ML 1+10，121℃ 16 to 30…
About DAI-EL™ G-7201 DAI-EL G-7201 is a cure-incorporated copolymer designed for injection transfer and compression molding applications. G-7201 offers low Mooney viscosity with good compression set resistance.&&DAI-EL™ G-7201 DAI-EL G-7201 is a fluoroelastomer comprising copolymer of vinylidenefluoride and…
About Viton® AL-600 is an “AL-family” gum polymer that demonstrates improved processing when compared to its precursor Viton® B-70N. This gum provides: Higher viscosity Improved mold flow Better mold release Less mold fouling Improved compression set resistance, and Good low…
About Fluorous rubber (FKM-DS2600), commonly called 2# rubber, is white elastomer and copolymer of VDF and hexafluoropropylene, with fluorine content of over 66%. The product processed and vulcanized by raw fluorous rubber (DS2600), featured by good mechanical property and excellent…
About DAI-EL® G-501NK DAI-EL®G-501NK is a terpolymer for use with diamine cure systems. G-501NK is a high viscosity grade for transfer and compression molding applications. G-501NK can be cured with low activity magnesium oxide and diamine.&&DAI-EL® G-501NK DAI-EL…