About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low/medium viscosity gumstock without incorporated curatives Process targets: injection and transfer molding, extrusion, calendering and coatings FC 1643 is amine or bisphenol curable&& Product Description Generic 氟橡胶 Material Status…

About DAI-EL™   G-716 DAI-EL G-716 is a cure incorporated copolymer designed for transfer, compression and injection molding applications. G-716 provides the best compression set resistance in the bisphenol cure system products.&&DAI-EL™   G-716 DAI-EL G-716 is a fluoroelastomer comprising…

About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low viscosity gumstock without incorporated curatives Process targets: injection and transfer molding, extrusion, calendering and coatings FC 2145 is amine or bisphenol curable&& Product Description Generic 氟橡胶 Material Status…

About Material Type: Red color fluoroelastomer compound, hardness Shore A 75-85. Based on bisphenol curable terpolymer which is higher fluorine content than copolymer. Features: Excllent mold flow, mold release, Good resistance to the fuel containing alcohols. Process Methods: Suitable for…

About 66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Food contact compliance,Copolymer…

About High fluorine tetrapolymers formulated for low temperature flexibility. HFLT compounds are excellent choices for fuel applications, including methanol-containing fuels, where low temperature flexibility is also essential. The LT compounds are designed for low temperature applications.&& Product Description Generic 氟橡胶…

About Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010&& Product Description Supplier Meilan Generic 氟橡胶 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.80 to 1.84 g/cm³ Mooney viscosity ML 1+10，121℃ 31 to 50…

About 66% Fluorine copolymers formulated for low cost. LC-LV compounds are also injection moldable.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Low Viscosity,Copolymer Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…

About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Ultra low viscosity fluoroelastomer without incorporated curatives Process targets: injection and transfer molding, extrusion, calendering and coatings Viscosity modifier Process aid Masterbatch dispersions Amine or bisphenol curable&& Product Description…

About 68% Fluorine terpolymers formulated for improved chemical resistance. IF compounds are good choices for fuel applications.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Solvent resistance,Terpolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density…

About BDF401HP is a medium viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good rheological properties and excellent compression set resistance are required. BDF401HP can be compounded to meet the major fluoroelastomer specifications. BDF401HP can…

About Material Type: Black color fluoroelastomer compound, hardness Shore A 80-90. Based on bisphenol curable coplolymers. Features: Excellent rheology, excellent mold release and good compression set. Process Methods: Suitable for compression molding processes. Applications: High pressure resistance O-rings and gaskets.…

About 3M™ Dyneon™ Fluoroelastomer FX 3735 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. FX 3735 has an incorporated bisphenol cure system. Special Features Composition: terpolymer of hexafluoropropylene, tetrafluoroethylene and vinylidene fluoride Proprietary incorporated cure technology Very high…

About 3M™ Dyneon™ FPO 3730 is a peroxide curable fluoroelastomer terpolymer containing 69.8 wt% fluorine. FPO 3730 can be used in compression, transfer or injection molding, and extrusion processes. Features and Benefits Good processability Excellent physicals Broad chemical resistance&& Product…

About 3M™ Dyneon™ Fluoroelastomer FE 5520 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. FE 5520 has an incorporated bisphenol cure system. Special Features Composition: Low fluorine content terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene Good compression set…

About Material Type: Black color fluoroelastomer compound, hardness Shore A 65~75. Based on peroxide curable fluoroelastomer with very high fluorine content which brings outstanding chemicals resistance properties. Features: Short post cure time Excellent mold flow and mold release, resulting in…

About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Faster curing version of FE 5640Q Process target: compression molding Improved scorch resistance over 2000 series products at high molding temperatures Proprietary incorporated cure technology Excellent mold release Improved…

About 3M™ Dyneon™ Fluoroelastomer MIP 8740 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. MIP 8740 has an incorporated bisphenol cure system. Special Features Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene Process targets: injection, transfer and compression…

About Material Type: Black color low-temp grade fluoroelastomer compound, hardness Shore A 65~75.Based on peroxide curable fluoroelastomer with high fluorine content. Features: Short post cure time Excellent mold flow and mold release, resulting in less flash Low temperature grade, tr10…

About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low viscosity version of FC 2144 Process targets: injection and transfer molding, extrusion, bonding and calendering Proprietary incorporated cure technology Excellent hot tear properties for molding articles with complex…