Cawiton® CN970

About
Cawiton CN970 is a high performance SEBS grade with a hardness of 70 Shore A. The temperature resistance and compression set are striking better than standard SEBS compounds.&&

Product Description
Generic	SEBS
Material Status	Commercial: Active
Features	Block Copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.10	g/cm³	ISO 2781
Melt Flow Rate
230℃，5.0kg	5.9	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	70		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength			ISO 37
TD, 100% strain	2.80	MPa	ISO 37
MD, 100% strain	3.50	MPa	ISO 37
TD, 200% strain	3.90	MPa	ISO 37
MD, 200% strain	4.70	MPa	ISO 37
TD, 300% strain	5.10	MPa	ISO 37
MD, 300% strain	5.90	MPa	ISO 37
tensile strength			ISO 37
TD, yield	9.70	MPa	ISO 37
MD, yield	7.40	MPa	ISO 37
Tensile strain			ISO 37
TD, fracture	610	%	ISO 37
Flow rate, fracture	500	%	ISO 37
tear strength			ISO 34-1
TD	36	kN/m	ISO 34-1
MD	38	kN/m	ISO 34-1
Compression deformation			ISO 815
70℃，22 hr	45	%	ISO 815
120℃，24 hr	83	%	ISO 815

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	152	℃	DSC

Process Conditions
injection	Nominal value	Unit	Test method
Hopper temperature	30 to 60	°C
Barrel rear temperature	170 to 210	°C
Barrel middle temperature	180 to 220	°C
Barrel front temperature	180 to 230	°C
Nozzle temperature	180 to 230	°C
Mold temperature	20 to 40	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.