| About |
|---|
| Cawiton® MT910 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe for injection molding. Important attributes of Cawiton® MT910 are: Sterilizable Copolymer Typical application of Cawiton® MT910: Medical/Healthcare&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Steam sterilized,Block Copolymer,Radiation disinfection,Ethylene oxide disinfection |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.890 | g/cm³ | ISO 2781 |
| Melt Flow Rate | |||
| 230℃，5.0kg | 60 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 10 | ISO 868 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 37 | ||
| TD, 100% strain | 0.400 | MPa | ISO 37 |
| MD, 100% strain | 0.700 | MPa | ISO 37 |
| TD, 200% strain | 0.500 | MPa | ISO 37 |
| MD, 200% strain | 0.800 | MPa | ISO 37 |
| TD, 300% strain | 0.700 | MPa | ISO 37 |
| MD, 300% strain | 0.900 | MPa | ISO 37 |
| tensile strength | ISO 37 | ||
| TD, yield | 1.50 | MPa | ISO 37 |
| MD, yield | 0.800 | MPa | ISO 37 |
| Tensile strain | ISO 37 | ||
| TD, fracture | 630 | % | ISO 37 |
| Flow rate, fracture | 370 | % | ISO 37 |
| tear strength | ISO 34-1 | ||
| TD | 12 | kN/m | ISO 34-1 |
| MD | 7.4 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 70℃，22 hr | 48 | % | ISO 815 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 166 | ℃ | DSC |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Hopper temperature | 30 to 60 | °C | |
| Barrel rear temperature | 160 to 200 | °C | |
| Barrel middle temperature | 170 to 210 | °C | |
| Barrel front temperature | 170 to 210 | °C | |
| Nozzle temperature | 180 to 220 | °C | |
| Processing (melt) temperature | 160 to 220 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Measured with a differential scanning calorimeter |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |