Cazeden A PET - SOLIAO

About
Cazeden A PET (previously referred to as T86) is a top quality thermoplastic material for injection stretch blow moulding and injection blow moulding of bottles for CSD, mineral water, edible oil, fruit juice, the pharmaceutical industry, dairy products, cosmetics and many more. Other applications include sheet extrusion, thermoforming of extruded sheets for food packaging, as well as industrial strap extrusion. The linear structure plus appropriate processing determine the superior physical and chemical properties of Cazeden A PET. The Cazeden A PET difference Outstanding properties create the excellence and uniqueness of Cazeden A PET as a packaging medium. Characteristics: Superb clarity and gloss Toughness and impact resistance Chemical resistance Low gas permeation Good processability Good dimensional stability (low creep under load) Relative light weight Recyclable&&

About

Cazeden A PET (previously referred to as T86) is a top quality thermoplastic material for injection stretch blow moulding and injection blow moulding of bottles for CSD, mineral water, edible oil, fruit juice, the pharmaceutical industry, dairy products, cosmetics and many more. Other applications include sheet extrusion, thermoforming of extruded sheets for food packaging, as well as industrial strap extrusion. The linear structure plus appropriate processing determine the superior physical and chemical properties of Cazeden A PET. The Cazeden A PET difference Outstanding properties create the excellence and uniqueness of Cazeden A PET as a packaging medium. Characteristics: Superb clarity and gloss Toughness and impact resistance Chemical resistance Low gas permeation Good processability Good dimensional stability (low creep under load) Relative light weight Recyclable&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good flexibility,Good surface appearance,High impact resistance,Good Dimensional Stability,Renewable resources,Low odor,Food contact compliance,Solvent resistance
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³

MECHANICAL	Nominal value	Unit	Test method
tensile strength	52.0	MPa	ASTM D638
Bending modulus	2400	MPa	ASTM D790
bending strength
fracture	75.0	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	74.0	℃	Internal Method
Crystallization peak temperature
DSC	260	℃	Internal Method
Thermal conductivity coefficient	0.21	W/m/K	ASTM C177

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	160 to 180	°C
Drying time	4.0 to 6.0	hr
Drying temperature	160 to 180	°C
Drying time	4.0 to 6.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.