| About |
|---|
| Regenerated cellulose film (RCF), coated on both sides with nitrocellulose by a solvent process.&& |
| Product Description | |
|---|---|
| Generic | 再生纤维 |
| Material Status | Commercial: Negative |
| Features | Good Clarity,Good surface appearance,Good heat sealing,High elastic,Renewable resources,Retention of aroma ,Low odor,Biodegradable,Moisture resistance,Grease resistance,Antistatic property |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.20 | ASTM D1894 | |
| With oneself – static | 0.25 | ASTM D1894 | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| 1% secant, MD: 42 µ m | > 3000 | MPa | ASTM D882 |
| 1% secant, TD: 42 µ m | > 1500 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield, 42 µ m | 125 | MPa | ASTM D882 |
| TD, yield, 42 µ m | 70.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 42 µ m | 22 | % | ASTM D882 |
| TD, fracture, 42 µ m | 70 | % | ASTM D882 |
| Sealing emphasis | 1.8 | N/mm | Internal Method |
| Initial sealing temperature | |||
| 42 µm | 90.0 to 160 | ℃ | Internal Method |
| Oxygen permeability (wet) (23 ℃, 42 µ m, 0.0% RH) | 3.00 | cm³/m²/24 hr | ASTM F1927 |
| Water vapor permeability | 20 | g/m²/24 hr | ASTM E96 |
| film thickness | 41.7 | µm | Internal Method |
| dosage | |||
| 41.7 µm | 16.7 | m²/kg | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45°，41.7 µm | 90 | ASTM D2457 | |
| Haze | |||
| 41.7 µm | 4.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. g(f)/38mm, 135°C, 0.5 secs, 69 kN/m² |
| 3. 0.5s dwell, 69 kN/m² |
| 4. RH: 0 to 5% |
| 5. 38°C, 90%RH |
| 6. 2.5° wide angle |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |