About |
---|
Celstran® CFR-TP PPS CF60-01 is a 60% carbon fiber by weight PPS (polyphenylene sulfide) continuous fiber (uni-directional) reinforced thermoplastic composite tape. This material exhibits a high strength-to-weight ratio, excellent chemical and flame, smoke, and toxicity or (FST) performance, and long-term heat stability. It is well suited for aerospace, oil/gas, sporting goods and industrial applications where demanding weight, chemical and FST performance is necessary. Alternate tape widths and thicknesses may be available.&& |
Product Description | |
---|---|
Supplier | Celanese |
Generic | PPS |
Material Status | Commercial: Active |
Features | Good Rigidity,Good heat aging resistance,Solvent resistance |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.55 | g/cm³ | ISO 1183 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Tensile modulus | 101000 | MPa | ASTM D3039M |
tensile strength | 2030 | MPa | ASTM D3039M |
Tensile strain | |||
fracture | 1.8 | % | ASTM D3039M |
Bending modulus | 105000 | MPa | ASTM D790 |
bending strength | 1220 | MPa | ASTM D790 |
Elongation at break and bending | 1.20 | ASTM D790 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Glass transition temperature | 90.0 | ℃ | ISO 11357-2 |
Melting temperature | 280 | ℃ | ISO 11357-3 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Fiber Areal Weight | 307 | g/m² | |
Tape Areal Weight | 439 | g/m² | |
Tape Thickness | 250.0 | µm | |
Tape Width | 305 | mm |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |