Celstran® PP-GF30-03-AD3002

About
30% long glass fiber reinforced, chemically coupled, heat stabilized, Polypropylene BLACK&&

Product Description
Supplier	Celanese
Generic	PP not specified
Material Status	Commercial: Active
Features	Chemical coupling,Heat Stabilized
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.12	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7000	MPa	ISO 527-2/1A
tensile strength
fracture	110	MPa	ISO 527-2/1A/5
Tensile strain
fracture	2.2	%	ISO 527-2/1A/5
Bending modulus
23℃	7000	MPa
80℃	6500	MPa
bending strength
23℃	175	MPa
80℃	100	MPa

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-30℃	22	kJ/m²
23℃	24	kJ/m²
Charpy Unnotch Impact strength
-30℃	48	kJ/m²
23℃	55	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	158	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.00 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	90 to 100	°C
Drying time	2.0	hr
Recommended maximum moisture content	0.20	%
Barrel rear temperature	200 to 230	°C
Barrel middle temperature	220 to 240	°C
Barrel front temperature	240 to 250	°C
Nozzle temperature	230 to 250	°C
Processing (melt) temperature	230 to 270	°C
Mold temperature	30 to 70	°C
Injection speed	慢
Back pressure	< 3.00	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.