Celstran® PP-GF50-10

About
50% long fiber glass reinforced, enhanced flow, UV stabilized, Polypropylene&&

Product Description
Supplier	Celanese
Generic	PP not specified
Material Status	Commercial: Active
Features	Weather resistance is good,Good liquidity
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	11000	MPa	ISO 527-2/1A/1
tensile strength
fracture	107	MPa	ISO 527-2/1A/5
Tensile strain
fracture	1.7	%	ISO 527-2/1A/5
Bending modulus
23℃	11000	MPa	ISO 178
bending strength
23℃	181	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	17	kJ/m²	ISO 179/1eA

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	90 to 100	°C
Drying time	2.0	hr
Recommended maximum moisture content	0.20	%
Barrel rear temperature	205 to 210	°C
Barrel middle temperature	210 to 215	°C
Barrel front temperature	220 to 230	°C
Nozzle temperature	225 to 230	°C
Processing (melt) temperature	220 to 240	°C
Mold temperature	40 to 70	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.