| About |
|---|
| Ceramer and Ceramerplus are high performance polymers and additives based on polyphenylene sulfone (PPSO2). Ceramer and Ceramerplus have excellent thermal stability, inherent flame resistance and universal chemical resistance.&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | Heat Stabilized,Good Hardness,Solvent resistance,Flame Characteristics,high-rigidity |
| Availabilitys | Europe,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.44 | g/cm³ | |
| Crystallinity | 60 | % | |
| Water Absorption | 1.8 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strain | ISO 178 | ||
| Fracture, -30 ℃ | 2.1 | % | ISO 178 |
| Fracture, 23 ℃ | 2.1 | % | ISO 178 |
| Fracture, 100 ℃ | 1.9 | % | ISO 178 |
| Fracture, 200 ℃ | 1.6 | % | ISO 178 |
| Fracture, 300 ℃ | 2.8 | % | ISO 178 |
| Flexural Modulus | ISO 178 | ||
| -30℃ | 3960 | MPa | ISO 178 |
| 23℃ | 3850 | MPa | ISO 178 |
| 100℃ | 3410 | MPa | ISO 178 |
| 200℃ | 3030 | MPa | ISO 178 |
| 300℃ | 1740 | MPa | ISO 178 |
| Flexural Strength | ISO 178 | ||
| -30℃ | 87.0 | MPa | ISO 178 |
| 23℃ | 84.0 | MPa | ISO 178 |
| 100℃ | 65.0 | MPa | ISO 178 |
| 200℃ | 47.0 | MPa | ISO 178 |
| 300℃ | 43.0 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed | > 295 | ℃ | ISO 75-2/A |
| 8.0 MPa, unannealed | 250 | ℃ | ISO 75-2/C |
| Glass Transition Temperature | >330 | ℃ | |
| Coeff. of linear thermal expansion | |||
| MD | |||
| -50 to 100 ℃ | 4.9E-5 | cm/cm/℃ | |
| 100 to 200 ℃ | 2.6E-5 | cm/cm/℃ | |
| 200 to 300 ℃ | 2.5E-5 | cm/cm/℃ | |
| 300 to 360 ℃ | 2.2E-5 | cm/cm/℃ |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface Resistivity | 1.0E+11 | ohms | ASTM D257 |
| Volume Resistance | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 12 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 3.60 | ASTM D150 | |
| 10 kHz | 3.50 | ASTM D150 | |
| 100 kHz | 3.50 | ASTM D150 | |
| 1 MHz | 3.41 | ASTM D150 | |
| 10 MHz | 3.39 | ASTM D150 | |
| 500 MHz | 3.37 | ASTM D150 | |
| 1.00 GHz | 3.37 | ASTM D150 | |
| 10.0 GHz | 3.28 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 10 kHz | 2.0E-3 | ASTM D150 | |
| 100 kHz | 4.0E-3 | ASTM D150 | |
| 1 MHz | 5.9E-3 | ASTM D150 | |
| 10 MHz | 5.2E-3 | ASTM D150 | |
| 500 MHz | 5.4E-3 | ASTM D150 | |
| 1 GHz | 5.8E-3 | ASTM D150 | |
| 10 GHz | 9.5E-3 | ASTM D150 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |