| About |
|---|
| EDF-224J is a certified prime grade 5% ETHYLENE VINYL ACETATE (EVA) copolymer designed for production of specialty Blown films requiring excellent balance of mechanical and optical properties. EDF-224J films exhibit outstanding clarity, good toughness and impact strength, and superior sealability. EDF-224J applications include Form-Fill-Seal packaging, ice bags, frozen food, poultry bags, and cling wrap. EDF-224J contains No slip and High antiblock. EDF-224J complies with FDA regulation 21CFR 177.1350 concerning EVA copolymers in contact with food articles.&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good flexibility,High impact resistance,High anti-blocking,Food contact compliance,Broad Seal Range,Copolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 5.0 | wt% | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 38 | µm | |
| Secant modulus | ASTM D882 | ||
| 1% secant, MD: 38 µ m, blow molded film | 127 | MPa | ASTM D882 |
| 1% secant, TD: 38 µ m, blow molded film | 146 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, fracture, 38 µ m, blow molded film | 25.1 | MPa | ASTM D882 |
| TD, fracture, 38 µ m, blow molded film | 23.9 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 38 µ m, blow molded film | 190 | % | ASTM D882 |
| TD, fracture, 38 µ m, blow molded film | 590 | % | ASTM D882 |
| Drop hammer impact | |||
| 38 µ m, blow molded film | 170 | g | ASTM D1709-A |
| Elmandorf tear strength | ASTM D1922 | ||
| MD: 38 µ m, blow molded film | 160 | g | ASTM D1922 |
| TD: 38 µ m, blow molded film | 75 | g | ASTM D1922 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 38.1 µ m, blow molded film | 74 | ASTM D2457 | |
| Haze | |||
| 38.1 µ m, blow molded film | 4.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 177 to 188 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |