CERTENE™ LDF-0218A

About
LDF-0218A is a certified prime grade specially designed for EXTRUSION of heavy duty Blown Film for industrial applications requiring excellent mechanical properties, such as heavy duty sacks, shipping bags, shrink wrapping pallet hoods, construction, agriculture and greenhouses. LDF-0218A features excellent processability and films exhibit high toughness, high impact and tear strength, and excellent shrink properties. LDF-0218A contains no antiblock, no UV stabilizer and no slip. LDF-0218A complies with FDA regulation 21CFR 177.1520 (c ) 2.1 + 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles.&&

About

LDF-0218A is a certified prime grade specially designed for EXTRUSION of heavy duty Blown Film for industrial applications requiring excellent mechanical properties, such as heavy duty sacks, shipping bags, shrink wrapping pallet hoods, construction, agriculture and greenhouses. LDF-0218A features excellent processability and films exhibit high toughness, high impact and tear strength, and excellent shrink properties. LDF-0218A contains no antiblock, no UV stabilizer and no slip. LDF-0218A complies with FDA regulation 21CFR 177.1520 (c ) 2.1 + 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,High impact resistance,Ultra high toughness,Low density,Good tear strength,High shrinkage
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.25	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	51	µm
Secant modulus
1% secant, TD, 51 µ m	207	MPa	ASTM D882
1% secant, MD, 51 µ m	172	MPa	ASTM D882
tensile strength
TD, fracture, 51 µ m	24.1	MPa	ASTM D882
TD, yield, 51 µ m	9.65	MPa	ASTM D882
MD, fracture, 50 µ m	24.8	MPa	ASTM D882
MD, yield, 51 µ m	10.3	MPa	ASTM D882
Tensile strain
TD, fracture, 51 µ m	600	%	ASTM D882
MD, fracture, 50 µ m	130	%	ASTM D882
Drop hammer impact
50 µm	180	g	ASTM D1709-A
Elmandorf tear strength
MD，50 µm	320	g	ASTM D1922
tear strength
TD，51 µm	150	g	ASTM D1922

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	193 to 221	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.