CERTENE™ LDF-0220B

About
LDF-0220B is a certified prime resin specially designed for production of heavy duty Blown films for industrial applications requiring excellent mechanical properties, such as heavy duty sacks, shipping bags, shrink wrapped pallet hoods, construction, agriculture and greenhouses. LDF-0220B features easy processability and films exhibit high toughness, high impact and tear strength, and excellent shrinkage properties. Minimum recommended film thickness is 2.5 mils. LDF-0220B contains no slip and medium antiblock.&&

About

LDF-0220B is a certified prime resin specially designed for production of heavy duty Blown films for industrial applications requiring excellent mechanical properties, such as heavy duty sacks, shipping bags, shrink wrapped pallet hoods, construction, agriculture and greenhouses. LDF-0220B features easy processability and films exhibit high toughness, high impact and tear strength, and excellent shrinkage properties. Minimum recommended film thickness is 2.5 mils. LDF-0220B contains no slip and medium antiblock.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Ultra high toughness,Low density,Good tear strength,High shrinkage
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.25	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	51	µm
Secant modulus
1% secant, TD, 51 µ m	207	MPa	ASTM D882
1% secant, MD, 51 µ m	173	MPa	ASTM D882
tensile strength
TD, fracture, 51 µ m	20.0	MPa	ASTM D882
TD, yield, 51 µ m	13.0	MPa	ASTM D882
MD, fracture, 50 µ m	32.0	MPa	ASTM D882
MD, yield, 51 µ m	13.0	MPa	ASTM D882
Tensile strain
TD, fracture, 51 µ m	600	%	ASTM D882
MD, fracture, 50 µ m	200	%	ASTM D882
Drop hammer impact
50 µm	260	g	ASTM D1709-A
Elmandorf tear strength
MD，50 µm	600	g	ASTM D1922
tear strength
TD，51 µm	150	g	ASTM D1922

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	195 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.