| About |
|---|
| LLHF-0826A is a certified prime grade Ethylene-Hexene Copolymer designed for production of superior strength and high stiffness Blown films. LLHF-0826A features good processability and films exhibit high impact strength, exceptional creep resistance, good tensile and tear resistances. LLHF-0826A major applications include heavy duty bags, shipping sacks, high strength liners, grocery bags and frozen food packaging films. Maximum recommended film drawdown is 0.5 mil. LLHF-0826A contains no slip and no antiblock. LLHF-0826A complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good flexibility,High impact resistance,Food contact compliance,Good tear strength,Copolymer,Hexene copolymers |
| Availabilitys | Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.80 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Secant modulus | |||
| 1% secant, TD, 25 µ m | 281 | MPa | ASTM D882 |
| 1% secant, MD, 25 µ m | 237 | MPa | ASTM D882 |
| tensile strength | |||
| TD, fracture, 25 µ m | 48.3 | MPa | ASTM D882 |
| TD, yield, 25 µ m | 13.1 | MPa | ASTM D882 |
| MD, fracture, 25 µ m | 57.9 | MPa | ASTM D882 |
| MD, yield, 25 µ m | 11.7 | MPa | ASTM D882 |
| Tensile strain | |||
| TD, fracture, 25 µ m | 800 | % | ASTM D882 |
| MD, fracture, 25 µ m | 510 | % | ASTM D882 |
| Drop hammer impact | |||
| 25 µm | 110 | g | ASTM D1709-A |
| Elmandorf tear strength | |||
| MD，25 µm | 140 | g | ASTM D1922 |
| tear strength | |||
| TD，25 µm | 780 | g | ASTM D1922 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 25.4 µ m, blow molded film | 55 | ASTM D2457 | |
| Haze | |||
| 25.4 µ m, blow molded film | 13 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |