| About |
|---|
| LLMF-118J is a certified prime resin designed for production of Blown films needing very good optics, excellent film strength and heat seal performance. LLMF-118J applications include heavy duty packaging, ice bags and sealant layer in coextrusions. LLMF-118J contains no slip, high antiblock and process aid. LLMF-118J complies with FDA regulation 21CFR 177.1520(c)3.2a, conditions of use B-H.&& |
| Product Description | |
|---|---|
| Generic | mLLDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good heat sealing,Optical performance,High anti-blocking,Food contact compliance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Secant modulus | |||
| 1% secant, TD, 25 µ m | 191 | MPa | ASTM D882 |
| 1% secant, MD, 25 µ m | 175 | MPa | ASTM D882 |
| tensile strength | |||
| TD, fracture, 25 µ m | 51.7 | MPa | ASTM D882 |
| TD, yield, 25 µ m | 9.65 | MPa | ASTM D882 |
| MD, fracture, 25 µ m | 58.6 | MPa | ASTM D882 |
| MD, yield, 25 µ m | 10.7 | MPa | ASTM D882 |
| Tensile strain | |||
| TD, fracture, 25 µ m | 620 | % | ASTM D882 |
| MD, fracture, 25 µ m | 450 | % | ASTM D882 |
| Drop hammer impact | |||
| 25 µm | 760 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD，25 µm | 230 | g | ASTM D1922 |
| tear strength | |||
| TD，25 µm | 500 | g | ASTM D1922 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60 °, 25.4 µ m, blow molded film | 93 | ASTM D2457 | |
| Haze | |||
| 25.4 µ m, blow molded film | 11 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 204 | °C | |
| Notes |
|---|
| 1. Conditions of use B – H |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |