| About |
|---|
| PBS-4AN is a certified prime grade Impact copolymer specially designed for extrusion of sheet for thermoforming food packaging containers. PBS-4AN features Antistatic to protect against dust pick-up, and Nucleation for faster crystallization times. It combines good thermal stability and fast cycles with good Toughness and Stiffness, good melt processing stability, and very good Organoleptic properties. PBS-4AN other applications include injection molding of household goods, food storage containers, and hospital wares. PBS-4AN complies with FDA regulation 21CRF 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food.&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good flexibility,Nucleation,Quick molding cycle,Food contact compliance,Good sensory characteristics.,Antistatic property,Impact copolymer,Heat Stabilized |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 4.0 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23 ℃, injection molding | 96 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, injection molded | 102 | ℃ | ASTM D648 |
| Vicat Softening Temp | 145 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, injection molding | 30.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Yield, injection molding | 8.0 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, injection molding | 1380 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 80 | ASTM D785 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |