CERTENE™ PHM-12

About
CERTENE™ PHM-12 PHM-12 is a certified prime grade Polypropylene designed for injection molding of general purpose applications. PHM-12 combines a good balance of medium-high flow processability with good tensile strength, high stiffness and good contact clarity. PHM-12 applications include thin-walled containers, housewares, medical ware, caps, closures, toys, and housings for small electrical appliances. PHM-12 recommended processing temperature is between 210° to 230°C with mold at 20°-50°C. PHM-12 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food.&&CERTENE™ PHM-12 PHM-12 is a certified prime grade Polypropylene designed for injection molding of general purpose applications. PHM-12 combines a good balance of medium-high flow processability with good tensile strength, high stiffness and good contact clarity. PHM-12 applications include thin-walled containers, housewares, medical ware, caps, closures, toys, and housings for small electrical appliances. PHM-12 recommended processing temperature is between 210° to 230°C with mold at 20°-50°C. PHM-12 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food.&&

About

CERTENE™ PHM-12 PHM-12 is a certified prime grade Polypropylene designed for injection molding of general purpose applications. PHM-12 combines a good balance of medium-high flow processability with good tensile strength, high stiffness and good contact clarity. PHM-12 applications include thin-walled containers, housewares, medical ware, caps, closures, toys, and housings for small electrical appliances. PHM-12 recommended processing temperature is between 210° to 230°C with mold at 20°-50°C. PHM-12 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food.&&CERTENE™ PHM-12 PHM-12 is a certified prime grade Polypropylene designed for injection molding of general purpose applications. PHM-12 combines a good balance of medium-high flow processability with good tensile strength, high stiffness and good contact clarity. PHM-12 applications include thin-walled containers, housewares, medical ware, caps, closures, toys, and housings for small electrical appliances. PHM-12 recommended processing temperature is between 210° to 230°C with mold at 20°-50°C. PHM-12 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good Clarity,High liquidity,Food contact compliance,Good Tensile Strength,Homopolymer
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	97	℃	ASTM D648
Vicat Softening Temp
	155	℃	ASTM D1525

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	32	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	90	R 级	ASTM D785
tensile strength
23℃	35	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	10	%	ASTM D638
Bending modulus
23℃	1630	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Injection temperature
Rear barrel temperature	210-230	°C
Central temperature of the barrel	210-230	°C
Barrel front temperature	210-230	°C
Die temperature	210-230	°C
Mold temperature	20-50	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.051 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.