CERTENE™ PRM-35

About
CERTENE™ PRM-35 PRM-35 is a certified prime grade Injection Molding copolymer specially designed for high speed injection of thin-walled applications requiring very good clarity and good impact resistance. PRM-35 exhibits high flow rate, very good processability, rapid mold filling, fast cycle time, very good dimensional stability, low warpage, and good balance of mechanical properties. PRM-35 typical applications include high quality consumer articles, thin-wall high gloss rigid packaging, and high quality housewares where high clarity is a key requirement. PRM-35 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food.&&CERTENE™ PRM-35 PRM-35 is a certified prime grade Injection Molding copolymer specially designed for high speed injection of thin-walled applications requiring very good clarity and good impact resistance. PRM-35 exhibits high flow rate, very good processability, rapid mold filling, fast cycle time, very good dimensional stability, low warpage, and good balance of mechanical properties. PRM-35 typical applications include high quality consumer articles, thin-wall high gloss rigid packaging, and high quality housewares where high clarity is a key requirement. PRM-35 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food.&&

About

CERTENE™ PRM-35 PRM-35 is a certified prime grade Injection Molding copolymer specially designed for high speed injection of thin-walled applications requiring very good clarity and good impact resistance. PRM-35 exhibits high flow rate, very good processability, rapid mold filling, fast cycle time, very good dimensional stability, low warpage, and good balance of mechanical properties. PRM-35 typical applications include high quality consumer articles, thin-wall high gloss rigid packaging, and high quality housewares where high clarity is a key requirement. PRM-35 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food.&&CERTENE™ PRM-35 PRM-35 is a certified prime grade Injection Molding copolymer specially designed for high speed injection of thin-walled applications requiring very good clarity and good impact resistance. PRM-35 exhibits high flow rate, very good processability, rapid mold filling, fast cycle time, very good dimensional stability, low warpage, and good balance of mechanical properties. PRM-35 typical applications include high quality consumer articles, thin-wall high gloss rigid packaging, and high quality housewares where high clarity is a key requirement. PRM-35 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good Clarity,Good surface appearance,High impact resistance,Good Dimensional Stability,High liquidity,Quick molding cycle,Food contact compliance,Random copolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, injection molded	85.0	℃	ASTM D648
Vicat Softening Temp	138	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, injection molding	28.3	MPa	ASTM D638
Tensile strain
Yield, injection molding	11	%	ASTM D638
Bending modulus
1% cut, injection molding	1240	MPa	ASTM D790
Rockwell hardness
R-level	96		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.051 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.