CERTENE™ SIS-030

About
CERTENE™ SIS-030 SIS-030 is a certified prime grade specially developed for EXTRUSION-THERMOFORMING applications requiring good Elongation and Rigidity. SIS-030 is a medium-flow grade that offers excellent melt uniformity and consistency of flow, very good extrusion and thermoform processability, and superior Impact resistance. The low residual volatiles of this resin makes it particularly suitable for packaging taste and odor sensitive articles. SIS-030 applications include deep-draw vacuum-forming tubs for ice-cream, drink and yogurt cups, lids, plates, and customized multiplayer sheet coextrusion. SIS-030 complies with FDA regulation 21CFR 177.1640, and with most international regulations concerning the use of Polystyrene in contact with food articles.&&CERTENE™ SIS-030 SIS-030 is a certified prime grade developed for EXTRUSION-THERMOFORMING applications requiring good elongation and rigidity. The low residual volatiles of the resin makes it particularly suitable for packaging taste and odor sensitive articles. SIS-030 complies with FDA regulation 21CFR 177.1640, and with most international regulations concerning the use of Polystyrene in contact with food articles.&&

About

CERTENE™ SIS-030 SIS-030 is a certified prime grade specially developed for EXTRUSION-THERMOFORMING applications requiring good Elongation and Rigidity. SIS-030 is a medium-flow grade that offers excellent melt uniformity and consistency of flow, very good extrusion and thermoform processability, and superior Impact resistance. The low residual volatiles of this resin makes it particularly suitable for packaging taste and odor sensitive articles. SIS-030 applications include deep-draw vacuum-forming tubs for ice-cream, drink and yogurt cups, lids, plates, and customized multiplayer sheet coextrusion. SIS-030 complies with FDA regulation 21CFR 177.1640, and with most international regulations concerning the use of Polystyrene in contact with food articles.&&CERTENE™ SIS-030 SIS-030 is a certified prime grade developed for EXTRUSION-THERMOFORMING applications requiring good elongation and rigidity. The low residual volatiles of the resin makes it particularly suitable for packaging taste and odor sensitive articles. SIS-030 complies with FDA regulation 21CFR 177.1640, and with most international regulations concerning the use of Polystyrene in contact with food articles.&&

Product Description
Generic	PS (HIPS)
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Low Residuals,Good liquidity,Food contact compliance,Low odor,Good Tensile Strength
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	3.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm, injection molded	120	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed, injection molded	93.0	℃	ASTM D648
Vicat Softening Temp	102	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	2200	MPa	ASTM D638
tensile strength
Yield, injection molding	24.8	MPa	ASTM D638
Tensile strain
Fracture, injection molding	45	%	ASTM D638
Bending modulus
1% cut, injection molding	2280	MPa	ASTM D790
Rockwell hardness
R-level	55		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.20 in/min
3. 0.051 in/min
4. Injection molded
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.