Cevian®-PC 5100

About
Cevian®-PC 5100 is a Polycarbonate (PC) product. It is available in North America. Characteristics include: Heat Resistant Impact Resistant&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Features	High impact resistance,High Heat Resistance,Moderate liquidity
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ISO 1183
Melt Flow Rate
300℃，1.20kg	9.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	60.0	MPa	ISO 527-2
Bending modulus	2250	MPa	ISO 178
bending strength	90.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	66	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	149	℃	ISO 306

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.