Chansieh Phenolic J-361

About
Chansieh Phenolic J-361 is a Phenolic material filled with wood flour. It is available in Asia Pacific for injection molding. Typical applications include: Appliances Automotive Electrical/Electronic Applications Kitchenware&&

Product Description
Supplier	Chansieh
Generic	酚醛树脂
Material Status	Commercial: Active
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.42 to 1.46	g/cm³	JIS K6915
Apparent density	0.62 to 0.67	g/cm³	JIS K6915
Shrinkage rate	1.0 to 1.2	%	JIS K6915

MECHANICAL	Nominal value	Unit	Test method
bending strength	78.5 to 98.1	MPa	JIS K6915

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength	24.5 to 34.3	J/m	JIS K6915

THERMAL	Nominal value	Unit	Test method
deformation	> 160	℃	JIS K6915

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	9.0 to 11	kV/mm	JIS K6915
insulation resistance			JIS K6915
Boiling	1.0E+7 to 1.0E+8	ohms	JIS K6915
Normal	1.0E+9 to 1.0E+10	ohms	JIS K6915

Supplementary information	Nominal value	Unit	Test method
Heat resistance	180	℃	JIS K6915

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.