| About |
|---|
| Chemfluor PTFE is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Typical application: Food Contact Applications. Characteristics include: Flame Rated Low to No Odor/Taste Chemical Resistant Good Flexibility High Purity&& |
| Product Description | |
|---|---|
| Supplier | Saint Gobain |
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,High purity,Low odor,Good wear resistance,Solvent resistance,Nontoxicity,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.17 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.010 | % | ASTM D570 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 288 | ℃ | ASTM D794 |
| Embrittlement temperature | -268 | ℃ | ASTM D746 |
| Melting temperature | 327 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 79 | kV/mm | ASTM D149 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 58 | ASTM D2240 | |
| Tensile strain | |||
| yield | 250 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |