Chemiton GBC0NA 70

About
SEEPS based compund ideal for POM, PET, PETG and PCTA overmoulding. It is endowed with the following characteristics: translucent surface, excellent grip and good mechanical properties. Application: Toothbrushes&&

Product Description
Generic	SEEPS
Material Status	Commercial: Active
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	150	g/10min	ASTM D1238

elastic body	Nominal value	Unit	Test method
tear strength	23	kN/m	ISO 34-1

THERMAL	Nominal value	Unit	Test method
Operating temperature	-30 to 70	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	70		ISO 868
tensile strength
fracture	6.00	MPa	ISO 527-2
Nominal tensile fracture strain	650	%	ISO 527-2

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	70	°C
Drying time	3.0	hr
Barrel rear temperature	155 to 185	°C
Barrel middle temperature	165 to 195	°C
Barrel front temperature	170 to 200	°C
Nozzle temperature	175 to 205	°C
Mold temperature	30 to 60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.