Chemlon® 110-15 MGH

About
Chemlon® 110-15 MGH is a Polyamide 66 (Nylon 66) material filled with 25% glassmineral. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Chemlon® 110-15 MGH are: Flame Rated Heat Stabilizer High Stiffness High Strength&&

Product Description
Supplier	Teknor Apex
Generic	PA66
Material Status	Commercial: Active
Features	HB,Good Rigidity,Heat Stabilized
Availabilitys	Europe,North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.35	g/cm³	ISO 1183
Molding shrinkage
MD	0.30 to 0.70	%	ISO 2577

MECHANICAL	Nominal value	Unit	Test method
Tensile Strength	140	MPa	ISO 527
Tensile Strain
Broken BRK	2.5	%	ISO 527
Yield yld	2.5	%	ISO 527
Flexural Modulus	6600	MPa	ISO 178
Flexural Strength	190	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Izod Notched Impact strength	3.85	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature HDT
1.8 MPa, unannealed	238	℃	ISO 75-2/B
0.45 MPa, unannealed	255	℃	ISO 75-2/B
Melting temperature	263 to 282	℃	DSC

FLAME CHARACTERISTICS	Nominal value	Test method
Flame Class Rating
0.75 mm	HB	UL 94
FMVSS flame retardant rating	PASSES	FMVSS 302

Process Conditions
Injection Molding	Nominal value	Unit	Test method
Drying Temperature	80	°C
Maximum Moisture Content	0.20	%
Injection pressure	25	%
Drying Temperature	241 to 257	°C
Middle Temperature Zone 2	257 to 271	°C
Front Temperature Zone 3	263 to 280	°C
Nozzle temperature	263 to 282	°C
Melt Temperature	263 to 282	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.