Chemlon® 60GSF6

About
60GSF6 is a 30% mixed glass sphere and fibre filled nylon 6 that offers a good compromise between strength, dimensional stability and surface aspect.&&

Technical Data

Process Conditions
Injection	Nominal value	Unit	Test method
Injection speed	Nominal value	Unit	Test method
drying temperature	80	°C
Drying time	20	hr
Temperature at the rear of the barrel	240 to 280	°C
Temperature in the middle of the barrel	240 to 280	°C
Front temperature of material barrel	240 to 280	°C
Processing (melt) temperature	250 to 275	°C
Mold temperature	60 to 80	°C
Back Pressure	Low
Screw Speed	Moderate

Notes
1. Typical properties: these are not to be construed as specifications.
2. Mould shrinkage is significantly influenced by many factors including wall thickness, gating, moulding shape and processing conditions. The range values given are determined from specimen bar mouldings of 1.5mm to 4mm wall thickness. They are provided as a guide for comparison purposes only and no guarantee should be inferred from their inclusion. (Specimens measured in the dry state, 24 hours after moulding).
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.