About |
---|
Cheng Yu FR200GV15 is a Polyamide 66 (Nylon 66) product filled with 15% glass fiber. It is available in Asia Pacific. Characteristics include: Flame Rated Flame Retardant&& |
Product Description | |
---|---|
Supplier | Cheng Yu |
Generic | PA66 |
Material Status | Commercial: Active |
Features | Good surface appearance,Good bond,Good tear strength,Electroplating,Block resin,Agglomerability,V-0 |
Availabilitys | Africa & Middle East ,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.47 | g/cm³ | ASTM D792 |
Shrinkage rate | ASTM D955 | ||
MD | 0.50 to 0.70 | % | ASTM D955 |
TD | 1.2 to 1.4 | % | ASTM D955 |
Water absorption rate | |||
saturated | 1.0 to 2.0 | % | ASTM D570 |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Notched impact strength of cantilever beam | |||
23℃ | 76 | J/m | ASTM D256 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Hot deformation temperature | |||
0.45 MPa, unannealed | 250 | ℃ | ASTM D648 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Surface resistivity | 1.0E+17 | ohms | ASTM D257 |
Dielectric constant | |||
60 Hz | 3.50 | ASTM D150 |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
0.50 mm | V-0 | UL 94 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Rockwell hardness | |||
M-level | 95 | ASTM D785 | |
tensile strength | 105 | MPa | ASTM D638 |
bending strength | 140 | MPa | ASTM D790 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |