Cheng Yu LD3010 Light Dispersive

About
Cheng Yu LD3010 Light Dispersive is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Asia Pacific. Applications of Cheng Yu LD3010 Light Dispersive include coating applications, electrical/electronic applications and housings. Primary characteristic: flame rated.&&

Product Description
Supplier	Cheng Yu
Generic	Polycarbonate
Material Status	Commercial: Active
Features	V-2
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792
Melt Flow Rate
300℃，1.20kg	20	g/10min	ASTM D1238
Shrinkage rate
MD	0.50 to 0.70	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，12.7mm	700	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	135	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-2		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	120		ASTM D785
tensile strength	60.0	MPa	ASTM D638
bending strength	90.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.