Cheng Yu T885GV3

About
Cheng Yu T885GV3 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific. Primary characteristic: flame rated.&&

Product Description
Supplier	Cheng Yu
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Features	V-0
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.55	g/cm³	ASTM D792
Shrinkage rate			ASTM D955
MD	0.30 to 0.70	%	ASTM D955
TD	0.90 to 1.3	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	120	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	228	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+15	ohms	ASTM D257
Dielectric constant
60 Hz	3.50		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	95		ASTM D785
tensile strength	130	MPa	ASTM D638
bending strength	195	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.