| About |
|---|
| Clariant ABS ABS5475是一种丙烯腈丁二烯苯乙烯(ABS)材料,。 该产品在北美洲有供货,加工方式为:注射成型。 Clariant ABS ABS5475的主要特性有: 耐冲击 耐化学品 良好的尺寸稳定性 良好的抗紫外线能力 高光泽度 Clariant ABS ABS5475的典型应用领域为:汽车行业&& |
| Product Description | |
|---|---|
| Supplier | Clariant |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good surface appearance,High impact resistance,Good Dimensional Stability,Solvent resistance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.60 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.40 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 240 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 92.8 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 102 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 8.6E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | 16 | kV/mm | ASTM D149 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 47.6 | MPa | ASTM D638 |
| fracture | 47.6 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 20 | % | ASTM D638 |
| Bending modulus | 2210 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 107 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 82 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 204 to 249 | °C | |
| Barrel middle temperature | 204 to 249 | °C | |
| Barrel front temperature | 204 to 249 | °C | |
| Processing (melt) temperature | 204 to 246 | °C | |
| Melt temperature (target) | 227 | °C | |
| Mold temperature | 24 to 79 | °C | |
| Injection speed | Fast | ||
| Back pressure | 0.345 to 2.07 | MPa | |
| Screw speed | 20 to 100 | rpm | |
| Cushion | 3.18 to 6.35 | mm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |