| About |
|---|
| CLEAR COTE™ 4 lb. Urethane Foam System is a high quality Polyol – Isocyanate, “foam in place” system with a free raise density of approximately 4 pounds per cubic foot. This system features a convenient easy to use 1 to 1, by volume mix ratio (100 parts A side to 89 parts B side by weight). Product rapidly expands to a rigid closed cell foam that is perfect for structural applications, molded trim, plagues, art frames, taxidermy, and void-fill flotation applications.&& |
| Product Description | |
|---|---|
| Generic | PUR |
| Material Status | Commercial: Active |
| Features | Good Clarity |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| K (wear) coefficient | 0.023 | W/m/K | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | ASTM D790 | ||
| — | 0.731 | MPa | ASTM D790 |
| — | 0.758 | MPa | ASTM D790 |
| Compression modulus | ASTM D1621 | ||
| — | 5.02 | MPa | ASTM D1621 |
| — | 7.14 | MPa | ASTM D1621 |
| compressive strength | ASTM D1621 | ||
| — | 0.278 | MPa | ASTM D1621 |
| — | 0.228 | MPa | ASTM D1621 |
| shear strength | ASTM C273 | ||
| — | 0.255 | MPa | ASTM C273 |
| — | 0.234 | MPa | ASTM C273 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按容量计算的混合比: 1.0 | ||
| Component B | 按容量计算的混合比: 1.0 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Amber | ||
| — | Brown | ||
| Density | |||
| — | 1.08 | g/cm³ | |
| — | 1.25 | g/cm³ | |
| viscosity | |||
| — | 0.30 | Pa·s | |
| — | 1.5 | Pa·s | |
| Tack Free Time | 6.0 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Perpendicular to Rise column |
| 3. Parallel to Ride column |
| 4. Parallel to Rise column |
| 5. Part B |
| 6. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |