Clear-Flex® 95

About
Clear Flex™ 50 and Clear Flex™ 95 are water white clear urethane liquid rubber compounds designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex™ 50 and 95 cure at room temperature with negligible shrinkage. Cured castings are clear, flexible and UV Resistant. Vibrant colors and color effects are achieved by adding pigments. Applications include making clear-cut molds, model reproductions, decorative cast pieces, special effects, prototype parts. CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. Proper ventilation, A NIOSH Approved Respirator and Protective Clothing (gloves and long sleeves) are required to minimize the risk of inhalation and dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read MSDS before using.&&

About

Clear Flex™ 50 and Clear Flex™ 95 are water white clear urethane liquid rubber compounds designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex™ 50 and 95 cure at room temperature with negligible shrinkage. Cured castings are clear, flexible and UV Resistant. Vibrant colors and color effects are achieved by adding pigments. Applications include making clear-cut molds, model reproductions, decorative cast pieces, special effects, prototype parts. CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. Proper ventilation, A NIOSH Approved Respirator and Protective Clothing (gloves and long sleeves) are required to minimize the risk of inhalation and dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read MSDS before using.&&

Product Description
Generic	PUR
Material Status	Commercial: Active
Features	Weather resistance is good,Good Clarity,Good flexibility,Low Viscosity,Low contractility,Good coloring
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	casting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D1475
Specific volume	0.968	cm³/g
Shrinkage rate
MD	0.28	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 23 ℃	95		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
Fracture, 23 ℃	17.2	MPa	ASTM D412
Tensile strain
Fracture, 23 ℃	180	%	ASTM D412
tear strength
23℃	35.0	kN/m	ASTM D624

optical performance	Nominal value	Unit	Test method
Refractive index
—	1.492
—	1.493

THERMAL	Nominal value	Unit	Test method
Thermosetting components
Component A	按重量计算的混合比: 1.0
Component B	按重量计算的混合比: 1.5
storage stability	25	min	ASTM D2471

Thermosetting mixed viscosity	Nominal value	Unit	Test method

Supplementary information	Nominal value	Unit	Test method
Curing time	16.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die C
3. 25°C
4. 20°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.