Clearflex® MQ F0

About
Clearflex MQ F0 is a linear polyethylene with antioxidants, characterised by a very low density (VLDPE). The resin shows an excellent balance between flexibility and impact resistance. Main Application Clearflex MQ F0 is suitable for injection moulding. Manufacts made by Clearflex MQ F0 are characterised by a high flexibility. Clearflex MQ F0 is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance.&&

About

Clearflex MQ F0 is a linear polyethylene with antioxidants, characterised by a very low density (VLDPE). The resin shows an excellent balance between flexibility and impact resistance. Main Application Clearflex MQ F0 is suitable for injection moulding. Manufacts made by Clearflex MQ F0 are characterised by a high flexibility. Clearflex MQ F0 is recommended for seals and gaskets, for blend with polyolefins to modify and improve impact resistance.&&

Product Description
Generic	VLDPE
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Food contact compliance,Inoxidizability,Low density
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.895	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	13	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	26		ISO 868
tensile strength
Fracture, injection molding	9.00	MPa	ISO 527-2
Yield, injection molding	4.00	MPa	ISO 527-2
Tensile strain
Fracture, injection molding	750	%	ISO 527-2
Bending modulus
injection molding	45.0	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	51.0	℃	ISO 306/A
Melting temperature	111	℃	Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	160 to 200	°C
Barrel middle temperature	160 to 200	°C
Barrel front temperature	160 to 200	°C
Mold temperature	10 to 40	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.