| About |
|---|
| Clyrell RC1908 is a specially designed propylene copolymer for manufacturing of films. Clyrell RC1908 contains anti-block agent. For regulatory information please refer to Clyrell RC1908 Product Stewardship Bulletin (PSB).&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | High anti-blocking,Copolymer |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 450 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 17.0 | MPa | ISO 527-2/50 |
| Tensile strain | ISO 527-2/50 | ||
| MD, fracture | 730 | % | ASTM D882 |
| yield | 16 | % | ISO 527-2/50 |
| fracture | 680 | % | ISO 527-2/50 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield | 18.0 | MPa | ASTM D882 |
| MD, fracture | 40.0 | MPa | ASTM D882 |
| Initial sealing temperature | 113 | ℃ |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 12 | kJ/m² | ISO 179 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 50.0 µ m, cast thin film | 88 | ASTM D2457 | |
| Haze | |||
| 50 µ m, cast thin film | < 1.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |