Colorite 88 Series 8588

About
Colorite 88 Series 8588 is a Polyvinyl Chloride product. It is available in Asia Pacific, Europe, or North America. Applications of Colorite 88 Series 8588 include food contact applications, outdoor applications and packaging. Characteristics include: Good Flexibility Low Temperature Resistant Non-Toxic&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Antifreeze,Low temperature toughness,Nontoxicity
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.25	g/cm³	ASTM D792

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-48.0	℃	ASTM D746

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	85		ASTM D2240
Tensile modulus
100% secant	10.3	MPa	ASTM D638
tensile strength	19.3	MPa	ASTM D638
Tensile strain
fracture	350	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.