CompaDur® 121 GF 20 LW natural (006)

About
PBT, injection molding grade, 20% glass fiber, heat stabilized, low warp, balanced flow ability and strength&&

Product Description
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good liquidity,Heat Stabilized,HB
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45	g/cm³	ISO 1183
Melt Volume Rate
250℃，2.16 kg	10.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7000	MPa	ISO 527-1-2
tensile strength
fracture	125	MPa	ISO 527-2/5
Tensile strain
fracture	3.0	%	ISO 527-2/5

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.80 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	120 to 140	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.020	%
Barrel rear temperature	250 to 265	°C
Barrel middle temperature	250 to 265	°C
Barrel front temperature	250 to 265	°C
Nozzle temperature	260 to 270	°C
Processing (melt) temperature	260 to 270	°C
Mold temperature	75 to 100	°C
Injection pressure	60.0 to 100	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.