| About |
|---|
| Complet® LCF15-LGF35-TPU is an Engineering Thermoplastic Polyurethane product filled with 15% long carbon fiber and 35% long glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: rohs compliant.&& |
| Product Description | |
|---|---|
| Generic | TPU |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.56 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 20700 | MPa | ASTM D638 |
| tensile strength | 248 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 1.0 to 2.0 | % | ASTM D638 |
| Bending modulus | 18600 | MPa | ASTM D790 |
| bending strength | 366 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 400 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | 1100 | J/m | ASTM D4812 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 93.0 | ℃ | ASTM D648 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |