CONAP® CE-1171

About
CONAP CE-1171 is a single-component acrylic conformal coating that has been formulated in Rule 66 exempt solvents and meets the latest requirements of MIL-I-46058C for Type AR coatings. CONAP CE-1171 is designed for thin-film applications on components and printed circuitry. It was developed specifically for its fast drying time and reparability and to provide the ultimate in humidity resistance and hydrolytic stability. CONAP CE-1171 retains excellent flexibility to prevent fracturing of fragile components during thermal cycling. Electrical properties are outstanding. Cured films maintain excellent adhesion to phenolic and epoxy glass laminates even in adverse environmental conditions. Components may be removed by melting through the coating with a soldering iron, or the entire coating may be removed with a suitable solvent. A tracer dye has been incorporated to aid inspection under ultra-violet light.&&

About

CONAP CE-1171 is a single-component acrylic conformal coating that has been formulated in Rule 66 exempt solvents and meets the latest requirements of MIL-I-46058C for Type AR coatings. CONAP CE-1171 is designed for thin-film applications on components and printed circuitry. It was developed specifically for its fast drying time and reparability and to provide the ultimate in humidity resistance and hydrolytic stability. CONAP CE-1171 retains excellent flexibility to prevent fracturing of fragile components during thermal cycling. Electrical properties are outstanding. Cured films maintain excellent adhesion to phenolic and epoxy glass laminates even in adverse environmental conditions. Components may be removed by melting through the coating with a soldering iron, or the entire coating may be removed with a suitable solvent. A tracer dye has been incorporated to aid inspection under ultra-violet light.&&

Product Description
Supplier	Cytec Industries
Generic	SMMA
Material Status	Commercial: Negative
Features	Good flexibility,Good Electrical Properties,Hydrolysis stability,Antimicrobial properties,Halogen free,Moisture resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.978	g/cm³
Solid content	30	%
viscosity
25℃	0.9	Pa·s	Brookfield

Electrical performance	Nominal value	Unit
Volume resistivity
25 ℃	2.0E+15	ohms·cm
Dielectric strength	> 120	kV/mm
Dielectric constant
25 ℃，100 Hz	2.50 to 3.00
Dissipation factor
25℃，100 Hz	0.010
insulation resistance
25℃	> 1.5E+13	ohms

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame Resistance	Self-extinguishing
flash point	18	℃

THERMAL	Nominal value	Unit	Test method
Storage period
25℃	78	wk

Supplementary information	Nominal value	Unit	Test method
Antifungal activity	Non-nutrient		ASTM G21

Notes
1. Typical properties: these are not to be construed as specifications.
2. Initially and 50% R.H.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.