CONTINUUM™ DMDE-6620 NT 7 BIMODAL

About
DMDE-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDE-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. High stiffness for superior top-load performance Excellent environmental stress crack resistance Excellent gas barrier properties High impact strength Good extrusion characteristics Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.1a EU, No 10/2011 Consult the regulations for complete details.&&

About

DMDE-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDE-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. High stiffness for superior top-load performance Excellent environmental stress crack resistance Excellent gas barrier properties High impact strength Good extrusion characteristics Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.1a EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.28	g/10min	ASTM D1238
190℃，21.6kg	27	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693
50 ℃, 10% non-ionic surfactant, F50	220	hr	ASTM D1693
50 ℃, 100% non-ionic surfactant, F50	> 1100	hr	ASTM D1693

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	82.0	℃	ASTM D648
Embrittlement temperature	-60.0	℃	ASTM D746
Vicat Softening Temp	131	℃	ASTM D1525
Melting temperature
DSC	133	℃	Internal Method
Crystallization peak temperature
DSC	121	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	59		ASTM D2240
tensile strength			ASTM D638
yield	28.0	MPa	ASTM D638
fracture	18.0	MPa	ASTM D638
Tensile strain			ASTM D638
yield	8.0	%	ASTM D638
fracture	670	%	ASTM D638
Bending modulus
2% secant	1170	MPa	ASTM D790-B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.