Converge® Polyol 212-20

About
Converge polyol 212-20 is a 2000 molecular weight polymer produced from propylene oxide and carbon dioxide. It is an amorphous, linear, aliphatic polycarbonate diol. Carbon dioxide accounts for approximately 40% of the polyol mass. Applications: Converge polyol 212-20 is a solvent-free, high viscosity building block for a variety of polyurethane systems. It can be used in the preparation of adhesives, foams, coatings, elastomers and TPUs. Features: The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In adhesive applications, it provides improved adhesive & cohesive strength and hydrolyti c stability. In coatings, it delivers UV resistance and high hardness. It substantially increases the load bearing, tensile, and tear strength of fl exible foams. It can also improve abrasion resistance.&&

About

Converge polyol 212-20 is a 2000 molecular weight polymer produced from propylene oxide and carbon dioxide. It is an amorphous, linear, aliphatic polycarbonate diol. Carbon dioxide accounts for approximately 40% of the polyol mass. Applications: Converge polyol 212-20 is a solvent-free, high viscosity building block for a variety of polyurethane systems. It can be used in the preparation of adhesives, foams, coatings, elastomers and TPUs. Features: The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In adhesive applications, it provides improved adhesive & cohesive strength and hydrolyti c stability. In coatings, it delivers UV resistance and high hardness. It substantially increases the load bearing, tensile, and tear strength of fl exible foams. It can also improve abrasion resistance.&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Features	Weather resistance is good,High Viscosity,Hydrolysis stability,Good Hardness,Good bond,Amorphous
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ISO 1183
molecular weight	2000	g/mol
water content	< 1000	ppm
acid value	< 0.50	Mg KOH/g
viscosity
75℃	100	Pa·s

Supplementary information	Nominal value	Unit
Functionality	2.00
OH Value	56.0	Mg KOH/g
Polydispersity	1.10

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.