| About |
|---|
| Converge polyol FF-1 is a blend optimized for viscosity and hydroxyl number. Carbon dioxide accounts for approximately 13% of the polyol mass. Applications: Converge polyol FF-1 is an optimized blend primarily for use in polyether based flexible slabstock foam. Features: The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In flexible foam applications, foams with excellent feel, fine cell structure, and improved load bearing properties have been observed. This product provides the capability to build load in foam without the use of styrene acrylonitrile (SAN).&& |
| Product Description | |
|---|---|
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Good flexibility,Aliphatic series |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 1183 |
| molecular weight | 3000 | g/mol | |
| water content | < 500 | ppm | |
| acid value | < 1.00 | Mg KOH/g | |
| viscosity | |||
| 25℃ | 6.70 | Pa·s | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Functionality | 2.90 | ||
| OH Value | 56.0 | Mg KOH/g |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
