| About |
|---|
| The VS/CR/AD1 Series is your material solution for applications in the consumer electronics section. The series features an exceptionally silky and velvety surface, accompanied by an outstanding resistance to skin oil, sun cream and olive oil. The compounds convince due to their excellent adhesion to polar thermoplastics such as ABS, PC and PC/ABS. Typical applications Ear phones Game consoles Handles and grips for consumer applications Remote controls Seals Material advantages Easy coloring (compounds in natural colors) Excellent color stability Good weathering resistance Insert molding possible Pleasant surface feel (Soft touch) Resistance against skin oil, sunscreens and olive oil Smooth and silky surface UL 94 HB listed&& |
| Product Description | |
|---|---|
| Supplier | KRAIBURG |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good surface appearance,Good bond,Grease resistance,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 9.50 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 850 | % | ISO 37 |
| tear strength | 28 | kN/m | ISO 34-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 73 | ISO 7619 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Adhesion to ABS | 34.0 | kN/m | Renault D41/1916 |
| Adhesion to PC | 31.0 | kN/m | Renault D41/1916 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 4.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Barrel 1 zone temperature | 160 | °C | |
| Barrel 2 zone temperature | 180 | °C | |
| Barrel 3 zone temperature | 200 | °C | |
| Nozzle temperature | 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type S2, 7.9 in/min |
| 3. Method Bb, Angle (Nicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |