| About |
|---|
| COSMOPLENE FL7540L is Polypropylene Terpolymer product with good Aluminum adhesiveness, good process stability and high gloss. COSMOPLENE FL7540L is designed for Aluminum metalized cast film (M-CPP) application. FL7540L contains antiblocking agent only.&& |
| Product Description | |
|---|---|
| Supplier | TPC |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,High anti-blocking,Good bond,Electroplating,Terpolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | 7.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 44.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 850 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 980 | MPa | ASTM D747 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 30 | µm | |
| Secant modulus | Internal Method | ||
| MD：30 µm | 520 | MPa | Internal Method |
| TD：30 µm | 530 | MPa | Internal Method |
| Initial sealing temperature | |||
| 30 µm | 125 | ℃ | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 138 | ℃ | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 30 µm | 165 | ASTM D2457 | |
| Haze | |||
| 30 µm | 2.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 240 | °C | |
| Traction roller | 50 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |