COSMOTHENE® F108-5

About
COSMOTHENE F108-5 is specially design for excellent shrinkage, toughness and strength. F108-5 is not formulated with slip and antiblocking agent. Shrink film food packaging, heavy duty bag & etc.&&

Product Description
Supplier	TPC
Generic	LDPE
Material Status	Commercial: Active
Features	Good flexibility,High shrinkage
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
	0.921	g/cm³	ASTM D792
	0.40	g/10min	ASTM D1238

Nominal value	Unit	Test method

19.6	MPa	ASTM D638

700	%	ASTM D638

210	MPa	ASTM D747

film	Nominal value	Unit	Test method

	30	µm

THERMAL	Nominal value	Unit	Test method
	109	℃	Internal Method

Nominal value	Unit	Test method

100		ASTM D2457

7.0	%	ASTM D1003

Nominal value	Unit	Test method

20.0	g/100 cm²	ASTM D3354
0.900	Tan θ	Internal Method

Process Conditions
Extrusion Molded	Nominal value	Unit	Test method
Barrel Zone 1 Temperature	155	°C
Barrel Zone 2 Temperature	160	°C
Barrel Zone 3 Temperature	175	°C
Melt Temperature	190	°C
Die Temperature	170 to 190	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.