COSMOTHENE® F210-6

About
COSMOTHENE F210-6 has excellent strength, good processibility and transparencey. It is formulated with medium level of slip and antiblocking agent. Shopping bag, transparent bag, sealant film for lamination and many others general purpose bag.&&

Product Description
Supplier	TPC
Generic	LDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
	0.922	g/cm³	ASTM D792
	2.0	g/10min	ASTM D1238

Nominal value	Unit	Test method

15.7	MPa	ASTM D638

600	%	ASTM D638

220	MPa	ASTM D747

film	Nominal value	Unit	Test method

	30	µm

THERMAL	Nominal value	Unit	Test method
	108	℃	Internal Method

Nominal value	Unit	Test method

100		ASTM D2457

6.0	%	ASTM D1003

Nominal value	Unit	Test method

25.0	g/100 cm²	ASTM D3354
0.170	Tan θ	Internal Method

Process Conditions
Extrusion Molded	Nominal value	Unit	Test method
Barrel Zone 1 Temperature	130	°C
Barrel Zone 2 Temperature	145	°C
Barrel Zone 3 Temperature	155	°C
Melt Temperature	160	°C
Die Temperature	160	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.